For direct connection from our DL6 or DL7 thinwall dripline to T6600 Polynet submain or other flat tube PE manifold with a maximum .050" wall thickness, or to large diameter PVC pipe with included grommet. Fits .630 diameter thinwall dripline. The .400” barb requires a 10 mm punch such as our TL5 or drill to install. Includes valve to turn off the thinwall lateral line.
- for rows with up to 4-1/2 gallon per minute flow rate (with 4 psi pressure loss)
See large photo below to view adaptor in use.
Please review these other products: